Blog LinkedIn YouTube Twitter

PS116 Series

PS116 Compact Position Switch

The PS116 Position Switches are extremely compact, very robust and extremely versatile. With a symetrical design, variety of contact configurations and a great selection of re-positionable actuators, the PS116 offers flexible  and reliable solutions for a multitude of applications.

  • Reliable Position detection
  • Compact high-quality design
  • Highly versatile
  • Robust and reliable
  • Easy to use

The PS116 dimensions are smaller than the standard switch according to EN 50041/ 50047. This allows you to install them in confined spaces to monitor the position or presence of moving parts, workpieces or conveyed materials. Four housing forms are available that differ in the position of the cable or the M12 connector.

The symmetrical construction of the housing and the possibility to rotate the actuating element in 45° steps makes it useable for both left and right handed switches. This is also applies for cable and connector versions.

All position switches of the new PS 116 range have positive break NC contacts according to IEC 60947-5-1. This allows you to use them in Type 1 safety-related applications according to ISO 14119, such as for the position query of safety gates.

In conjunction with suitable safety evaluation a single safety switch can be used up to PL d. Two position switches PL e can be reached according to ISO 13849-1.

All available switching elements have a contact opening of 2 x 2 mm and fulfils the requirements of EN 81-1 for use in Elevator Technology.

The PS 116 is available with various actuating elements, all of which can be set or installed in 45° steps and are inter-exchangeable. The roller lever can also be set in 15° steps.

Different contact versions for snap and slow action allow a wide range of switching and monitoring functions. The versions with three contacts allow a redundant switch-off with an additional signalling contact. Versions with snap switches are available with a latching function where the actuating element has to be manually reset to the starting position. The protection types IP66 or IP67 create the prerequisites for using the position switch in unfavourable environmental conditions.

Technical Documents


Related Industries